123Paracord JIG PRO Clamp Attachment

Due to shipping, the hinge is not attached to the JIG. You can assemble it as follows:

• Place the two plastic rings as shown in IMG 1 and IMG 2. These go on the inside of the hinge (IMG 3).

IMG 1

IMG 2

IMG 3

• Place the steel ring and the bolt (IMG 4) and tighten them with the supplied Allen key (IMG 5).

IMG 4

IMG 5

• Place the steel ring and handle (IMG 6) and tighten it (IMG 7).

IMG 6

IMG 7

Note: You cannot turn the handle fully because the JIG is in the way. You can pull the handle outwards and turn it back. Then you can make the next turn (IMG 8). Repeat this until the handle is tight.

IMG 8